How Do You Remove And Reinstall A 1977-1982 Corvette Sunvisor
This weeks Corvette Question comes from Bobby who owns a 1981 Corvette.
How do I remove and reinstall a 1977-1982 Corvette sunvisor?

Corvette Sunvisors
Answer: Removal and installation of 1977-1982 Corvette Sunvisors is fairly simple and can be done with your basic hand tools (Note: the assistance of another person is recommended). Start by removing the Corvette’s T-Top Panel. Take a small screwdriver (jewelers type preferably) and lift the chrome access plug out of the header. Looking into the access hole you will see the threaded portion of the sunvisor rod that is being held to the roof of the Corvette by a tension spring and retainer. Take a small punch and tap the sunvisor pin down but be sure not to apply too much tension to the windshield (remember, this area is also supported by the windshield header which is part of your Corvette’s Birdcage). By lightly tapping the pin downwards the sunvisor and rod should fall into the Corvette. Make sure you keep your face away as the rod is under a lot of tension with the spring and retainer holding it to the roof. You will not be able to salvage the retainer as the star points will break off but you can order a new Corvette Sunvisor Mount Spring & Retainer Kit from Zip.
Purchase online at Zip Corvette Parts
Do you have a Corvette technical question that you need answered? Click here to submit your question
Related posts:
- How To Remove & Reinstall The Starter On A 1972 Corvette?
- How To Adjust 1968-1977 Corvette T-Tops
- How Do You Remove The Battery From A 1987 Corvette?
- How do you remove the windshield wiper motor from a 1969 Corvette?
- How do you take out the speedometer on a 1968-1977 Corvette?
Recent Comments