Home > C6 Corvettes, Performance Corvette Parts > C6 Corvette DiabloSport Predator Programmer & Tuner

C6 Corvette DiabloSport Predator Programmer & Tuner

April 26th, 2010
C6 Corvette Predator Programmer

Corvette Predator Programmer

The C6 Corvette DiabloSport Predator Programmer is a state-of-the art, high performance tuning flash programmer in a sleek handheld design. Once connected to your C6, Z06, or Grand Sport Corvette, the Predators internal computer recognizes the PCM and automatically picks the proper tuning files designed specifically for that PCM. Inside the Predator’s memory are the actual tuning files that optimize spark timing and air/fuel ratio curves. Unlike other “tuners”, the DiabloSport Predator programming is performed in very small increments throughout the entire RPM range, for a smoother, wider and more predictable power delivery. DiabloSport engineers spend many hours on the dyno, street, and track to ensure the tunes provided with the Predator are the best they can possibly be for your Corvette.

Installing a DiabloSport tune on your Corvette using the Predator Programmer is simple and only takes a few minutes. You should know that the very first time the predator is used on your Corvette it will automatically create a backup of the original factory tune. If your Corvette has previously been tuned you should proceed with caution as serious engine damage can occur if the Predator tune is installed over a non-factory or aftermarket tune. We recommend having a Chevrolet dealer reflash your Corvettes ECU (Engine Control Unit) to its original settings so there will be no possibility of damage to your Corvette.

Before starting to install the tune be sure that your Corvette is parked and the engine is off. All doors must be closed and all electrical accessories must remain off. To install the tune, plug the Predator into the diagnostic port. The predator will recognize the vehicle and then give the options of performance tune, diagnostics, or options; select performance tune by pressing the continue key. After reading the disclaimer you can now turn the ignition on being sure not to start the vehicle. Next highlight the type of tune you would like to install and follow all prompts to turn the ignition on and off. While the tune is being written, be sure not to interrupt the process or ECM damage can occur. Once completed, you simply unplug the Predator and cycle the key to start your Corvette’s engine. The predator also contains several DiabloSport tunes that have been tested and approved by their engineers. You can install your choice tune as is or you may customize the tune to meet your wants and needs.

If you are planning on having your Corvette serviced it is recommended that you restore your Corvette back to the stock tune. This can be done at any time using the restore feature on the Predator. No need to worry if you have customized the tune as it will be saved for future use.

All C6 Corvette DiabloSport Predator Programmers come with a manufacturers two year warranty that covers defects in materials or workmanship. Be sure to Register Your Predator Programmer to take advantage of the warranty as well as other benefits including tech support, software update notifications, product benefits, monthly giveaways and more.

Tuning Paramaters:

Cooling Fan – On/Off Temperatures Rev Limiter
Multiple Fuel Adjustment Points Shift Points – RPM Full Throttle
Multiple Timing Adjustment Points Shift Points – MPH (Up/Down)
Injector Adjustment – Injector Size/LT Fuel Trims Shift Pressure – part Throttle
Rear O2 Sensors – EGR On/Off (Race Use Only) Fuel Table – Adjustment
Torque Modulation On/Off Per Gear Global Spark
MAF Curve – Adjustment Idle – Adjustment
Timing Table – Adjustment Shift Pressure
Torque Management – On/Off Shift Timing
Traction Control – On/Off Speed Limiter
C6 Corvette DiabloSport Predator Programmer

DiabloSport Predator Features:

Will Not Void Factory Warranty Internet Updatable
Diagnostics – Read & Erase Fault Codes Data Monitoring
Large Backlit display Data Logging
Holds Up To Five Custom Tunes Performance Calibrations
30+ Horsepower Gains Free Firmware Updates

Purchase online at Zip Corvette Parts

  • Share/Bookmark

Related posts:

  1. 1999-2008 Corvette Superchips Cortex Programmer
  2. C5 Corvette Hypertech Power Programmer

, , , , , , , , , ,

  1. James Lundberg
    June 22nd, 2010 at 04:23 | #1

    I tried programming my 2001 C5 Corvette last night with the predator and now it won’t start. Please help! It is like there is a kill switch on the Corvette. Everything turns on it just won’t crank the starter. What do I do? I tried switching it back to factory settings, still no start. Please help.

  2. June 24th, 2010 at 08:46 | #2

    James,
    Did you disconnect it early? Did you follow the directions exactly? Did you open or close a door, or turn anything on or off including the ignition while you were programming? It could also just be you had an issue with the starter. You should diagnosis that you are actually not getting power to the start before you assume it is the programming.

  3. Ralph
    June 29th, 2010 at 21:42 | #3

    Check your Corvette’s anti-theft relay, this same problem happend to me.

  4. Bart
    July 7th, 2010 at 09:00 | #4

    I have a C6 Corvette and I bought a predator programmer for it but I do not see where torque management is located? I have a 6 speed if that makes a difference.

  5. July 7th, 2010 at 09:09 | #5

    Bart,
    The torque management is located under “modify parameters”.

  1. No trackbacks yet.