Home > C6 Corvettes, New Corvette Parts, Technical Articles > New C6 Corvette Carbon Fiber Door Handle Covers

New C6 Corvette Carbon Fiber Door Handle Covers

November 18th, 2008

Another new Corvette part at Zip. This one for the C6 owner.

New C6 carbon fiber door handle covers are now available from Zip Corvette! They are molded into the same shape as the original GM design but have been overlayed with a UV protected high gloss carbon fiber finish.

C6 Carbon Fiber Door Handle Covers

C6 Corvette Carbon Fiber Door Handle Covers

As many Corvette enthusiast already know, attention to detail can make a difference on the show field. These carbon fiber door handle covers will without a doubt separate any Corvette from the pack. Door handle covers are Made in the USA. Follow along as we install a new set of these Corvette Door Handle Covers:

C6 Door Handle Installation instructions: With the introduction of the new C6 Corvette, GM created the finest automobiles available, however it seems they left the door open for a few personalized improvements. So what better way to improve the looks of your Corvette than with GM’s own line of bolt-on accessories? Follow along and we will show you just how easy it can be for you to transform your Corvette’s door handles into something to talk about.

Note: All C6 Corvettes come with flat black door handles regardless of the exterior color

01

01: Remove the two Phillips screws on the backside of the handle.

02

02: Once the screws are removed, carefully pull back on the bezel just enough to remove it from the door.

03

03

04

04: Now carefully push the door opening switch out of the bezel.

05: This is the door opening switch assembly.

05: This is the door opening switch assembly.

06: With the new bezel in hand you need to push the switch into the new bezel. This will be a little harder then the original bezel since it is painted. Just apply a little pressure to the switch and it will lock into the bezel.

06: With the new bezel in hand you need to push the switch into the new bezel. This may be a little harder then the original bezel since it is overlayed. Just apply a little pressure to the switch and it will lock into the bezel.

07: Install the bezel on the door by placing the lip of the bezel on the outside of the door first. Using light pressure push the bezel until it fully seats in the door.

07: Install the bezel on the door by placing the lip of the bezel on the outside of the door first. Using light pressure push the bezel until it fully seats in the door.

08: Re-install the two Phillips screws that you removed from the original bezels.

08: Re-install the two Phillips screws that you removed from the original bezels.

09: This is the door bezel installed.

09: This is the door bezel installed.

10: Final shots of the painted door bezels.

10: Final shot of the door bezel.

11: Final shots of the painted door bezels.

11: Final shot of the door bezel.

Now available to purchase online from Zip Corvette Parts:

C6 Corvette Carbon Fiber Door Handle Covers

  • Share/Bookmark

Related posts:

  1. C5 & C6 Corvette Carbon Fiber Driveshaft
  2. 1960-1962 Corvette Door Latch Mechanism
  3. C5 Corvette Speed Lingerie Headrest Covers
  4. Corvette Car Covers
  5. C6 Corvette Ignition Switch Replacement

, , , ,

  1. No comments yet.
  1. No trackbacks yet.