84-96 Corvette Removable Roof Panel
Is the roof panel on your C4 Corvette showing age? Exact reproduction Polycarbonate Removable Roof Panels for 1984-1996 C4′s are available at Zip Corvette. These roof panels include the correct polycarbonate lens with an improved coating, making them almost indestructible. Featuring Factory Blue Tint (privacy glass), a Super Abrasion Resistant (SAR) hard coated lens, correct DOT (Department of Transportation) markings and reproduction latex weatherstrips, these tops will pass NCRS guidelines. GM Licensed with the correct GM part # 12370123.
Early 1986 design measures 28 1/2″ between the mounting bolts on the front windshield; late 1986 measures 31 1/2″. Confirm measurements on 1986 Corvette prior to ordering.
Note: All factory roof panels require fitment to your Corvette prior to installation. Fitments can be handled by simply loosening all mounting points and then installing the roof panel. Once roof panel is aligned and installed – mounting brackets can be secured on the panel from the inside of the Corvette.
View all Corvette Parts Blog Posts specific to C4 Corvettes here
1990-1996 Center Console Door
Time, heat and UV light can take its toll on your Corvette’s interior. One of the first Corvette Parts to show wear is often the center console door, because it has the added pressure of your arm bearing down on it. For many years, the only option for replacement for your C4 was an overpriced GM unit!
Zip has a new reproduction C4 Corvette Center Console Doors for 1990-1996 C4 Corvettes. Our new reproductions include upper and lower portions for a complete replacement. This door has the same padded feel as the original, with the textured grain on top. The light assembly and wiring are included, as well as a new latch button and latch spring. This console fits all C4 Corvette models including ZR1 and 1996 Grand Sports.
Want to keep your C4 Corvettes option list located on the bottom side of the console door? Simply remove your Corvette’s upper console padded cover and replace it with the new reproduction. This keeps your C4 Corvette original and looking good!
View all Corvette Parts Blog posts specific to C4 Corvettes here.
More new Corvette Parts at Zip. These for the 1984-1996 C4 owner.
Zip now offers new C4 Corvette Suspension Parts including sway bar bushings, brackets and hardware that will allow you to rebuild your Corvettes front and rear suspension to factory original standards. These C4 Corvette Parts were previously discontinued by GM and have not been available until now. This is great news for those of you who are restoring or updating the suspension in one of your most prized possessions.
View all Corvette Parts Blog posts specific to C4 Corvettes here.
C4 Fuel/Trip Reset Buttons
When it comes to your C4, there are no insignificant or unimportant Corvette Parts. For example, Trip Odometer and Fuel System Reset Buttons may seem minor, but without them, your Corvette’s trip and fuel reset functions are hindered.
Zip now offers new reproduction C4 Trip Odometer Reset Buttons and C4 Fuel System Reset Buttons for your 1990-1996 Corvette.
When your Corvette is missing these small buttons, you cannot reset their functions nor can you reset the oil life maintenance function.
Installation of new trip and fuel system reset buttons is easy – just mount them into the instrument cluster. This is a simple fix that will improve the appearance of your Corvette’s dash and help keep your C4 in top shape.
C4 Power Seat Control Plastic Indicator
Sometimes, it’s the small details that can really complete a Corvette. Missing Corvette Parts can be more than just an eye sore, they can be a driving distraction when those missing parts allow for a light beam to shine through the console. Previously unavailable, GM now offers a replacement C4 Corvette Power Seat Control Plastic Indicator.
1990-1991 Corvettes with power seats had a seat control switch that used a triangular indicator on the console. GM called this part a power seat adjuster switch plate insert while others called it a power seat control light cover, power seat triangle or indicator. Regardless of what you call it, when it’s missing – and this part often goes missing – it’s a major annoyance.
Replacement of this indicator is simple - it just snaps into place. And here’s a suggestion – when replacing one side, it’s always a good idea to replace the other side with our matching indicator because over time, fading and color variations may not leave you with a perfect match. Just another one of those small details that will give your Corvette a polished look. Order both at the same time. You’ll be glad you did.
1985-1989 Corvette Air Filter Cover Screw
Sometimes, the biggest headaches come from the smallest Corvette Parts. Previously discontinued by GM, the Corvette Air Filter Cover Screw is once again available for your 1985-1989 C4 Corvette. The threaded metal shaft with “knurled” plastic top holds the air filter cover to the housing. Two of these screws are required per Corvette.
Corvettes are highly susceptible to front end damage or collisions, therefore Zip has added several new reproduction Corvette Parts that have been previously discontinued by GM. All are needed to properly repair the front end of your Corvette both for aesthetics and proper cooling efficiencies. These new 1984-1996 C4 Corvette Front End Parts are just a few of several new reproduction parts that are now available from Zip.
C4 Corvette Lower Baffle
On many early model C4 Corvettes, the Air Intake Radiator Lower Baffle is often seriously damaged or in the worst cases, missing all together due to parking lot stops or curbs. Not having the radiator lower baffle can inhibit your Corvette’s cooling system from cooling the engine properly by not directing airflow through the radiator. This reproduction radiator lower air baffle, also sometimes called a radiator duct, is necessary to keep your engine at the correct operating temperature. Fits 1985-1989 Corvettes only.
C4 Corvette Valance Panel
Often the casualty of concrete parking stops or curbs, it’s not uncommon for a C4 to be missing the Corvette Lower Valance Panel/Air Deflector. This C4 Corvette item is critical for keeping your Corvette operating at normal temperatures by helping to direct air into the radiator for efficient cooling. Fits all 1984-1989 Corvettes.
Lower Valance Panel Brace
The Corvette Lower Valance Panel/Air Deflector Brace attaches to the radiator lower air baffle in the middle to give support to the front air deflector. If your car’s brace is missing, it can raise the temperature of the engine significantly. This deflector brace is a reproduction of the 1986 and later model which was engineered to be heavier than the flimsy 1984-1985 style braces. Fits all 1984-1990 Corvettes.
Corvette Air Dam Retainer
The Corvette Lower Air Dam Center Retainer is an important part to support and strengthen the lower plastic baffle. Replacing this retainer with this new reproduction insures the air baffle is properly supported and helps to insure cool air is properly directed into your early C4 Corvette. Fits all 1984-1996 Corvettes.
Corvette Toe Rod Link Assembly
Zip Corvette has found new “old stock” rear toe rod link assemblies that are available in limited supply, while they last. These C4 Corvette Rear Toe Rod Link Assemblies are the later 1992-1996 style that use the same outer tie rod as the front of your Corvette. If you own a 1984-1991 Corvette, you will have to purchase the 1992-1996 style tie rod in order to use this assembly.
These 1984-1996 toe rod link assemblies have not been available for several years and will most likely not be available again for many years to come.
C4 Corvette Roof Panel
Original C4 Corvette Roof Panels show their age quickly. Often times you’ll notice the coating beginning to peel away or spider cracks appearing throughout the lens. And that’s if you’re lucky enough for the panel to hold together. Often times they’ll split right down the middle due to weakened materials and rising interior heat levels.
Replacement C4 Corvette acrylic roof panels have been available since 1984-1996 Corvettes began production, however just recently a completely new correct reproduction has become an option for the discerning Corvette enthusiast.
These new exact reproduction roof panels include the correct polycarbonate lens with an improved coating and almost indestructible capabilities. They feature the factory blue tint (privacy glass), Super Abrasion Resistant (SAR) hard coated lens and correct DOT (Department of Transportation) markings. The new panels are GM licensed with the correct GM part # 12370123 stamping and reproduction Corvette Weatherstrip – so this top panel will even pass the NCRS guidelines.
These new panels are available for all 1984-1996 Corvettes, but remember when ordering a roof panel for the 1986 model; Chevrolet made some mid-year production changes. *The early 1986 design measures 28 1/2″ between the mounting bolts on the front windshield; *late 1986 design measures 31 1/2″. Confirm measurements on your 1986 Corvette prior to ordering.
C4 Corvette Steering Wheel
Don’t you hate it when you sit in a really nice 1984-1989 C4 Corvette and place your hands onto the steering wheel only to find that it is dirty or worn out? Or better yet it has one of those cheap steering wheel covers on it from one of those local “auto parts” stores. You know… the one we get our wax from! The fact is, your Corvette’s steering wheel suffers from the harsh effects of UV sunlight and while it may have been supple leather in its glory days, now it seems there is more black leather on the floor than the top of your wheel. This doesn’t have to be your C4! Zip Corvette has new reproduction C4 Corvette Steering Wheels that include leather wrapping, padding and stitching as original.
Installation of a new C4 steering wheel from Zip is easy, just slip off your Corvette’s horn button, horn contact and telescopic pawl and you will have direct access to the 13/16” nut holding the steering wheel in place. Use of a steering wheel puller will aid removal and keep you from damaging your Corvette’s steering shaft. Reassemble in reverse order; torquing the steering wheel nut to 45lbs. Once reinstalled your early C4 Corvette is like new again.
Oh, by the way if you own a 1984 or 1985 Corvette and have the “slim” design steering wheel, this is a perfect time to upgrade to the “fat” 1986-1989 design. When installing on a 1984-1985 Corvette, the Horn Button & Horn Contact must be updated as well. This will look great and be a nice addition to the interior of your Corvette. Let Zip Corvette “steer” you in the right direction when it comes to Corvette parts for your C4 Corvette.
By Andy Young – Zip Vice President
