Corvette Parts Blog

C4 Corvette valve covers are huge eyesores under your Corvette’s hood if they have not been maintained over the years. Even if your Corvette has been garage kept and well maintained, old faded valve covers are hard to avoid. The mixture of engine oil and dirt with some occasional water or other substances can really fade or rust your Corvette’s valve covers over time. Even if the Corvette was rarely driven the valve covers would still fade as they age.

C4 Corvette Valve Covers

If you have driven your C4 Corvette on a daily basis as many people have, take a look at your valve covers. If they look anything like the majority of the valve covers that we see on a daily basis then a can of Corvette Valve Cover Paint might be a quick fix for the looks of your Corvette’s engine compartment.

Our Corvette Valve Cover Paint will restore your discolored OEM valve covers from engine heat, cleaning chemicals and/or road grime to their original factory finish. This paint is the correct tint as used on original C4 Corvette valve covers and one can is enough paint to restore both valve covers.

C4, Corvette Valve Cover Paint, Corvette Valve Covers

Protect your Corvette’s Interior from damaging UV rays with a new Corvette Sunshade from Zip. While the hot summer months bring plenty of warm weather to enjoy they unfortunately can do more harm than good to your Corvette’s interior. With interior temperatures reaching a scorching 150 degrees inside many Corvettes, you can only imagine what day after day exposure to this amount of heat and sunlight is doing to your dash, leather, vinyl and other interior components.

The easiest solution for protecting your Corvette’s interior from the extreme heat and sunlight is to install a Corvette Sunshade. You can purchase very cheap sunshades from a local auto parts store but the fact is that they are not custom made to fit a Corvette and they simply do not look as nice as our Corvette Sunshades. We offer sunshades for C4, C5, and C6 Corvettes all of which come with the Corvette logo and are custom made to fit your Corvette.

C4 Corvette Sunshade

This C4 Corvette Cool Shade is specifically designed for 1984-1996 Corvettes. It’s reflective nylon surface effectively blocks rays to reduce heat build-up and prevent fading. The 1-piece lightweight coil frames twist closed to a compact 9″ for easy storage. To clean this sunshade simply wipe down with a damp towel or sponge. Sunshade includes “Corvette” script on one side and a C4 Corvette logo on the other.

C5 Corvette Sunshade

This 2-pc C5 Corvette Cool Shade is designed to fit 1997-2004 Corvettes. Like the C4 sunshade the Reflective nylon surface effectively blocks rays to reduce heat build-up and prevent fading. Each panel measures 28″ x 32″ and includes a screen printed “Corvette” script and a C5 Corvette logo. Simply wipe the sunshade with a damp towel or sponge to keep clean.

C5 Corvette Sunshade

This 1-pc C5 Corvette Sunshade will fit your Corvette’s windshield perfectly. The sunshade is triple laminated constructed and has a reflective outer layer, which blocks direct sun and protects the interior surfaces from heat build-up and fading. The sunshade features a C5 logo and sewn-in Velcro straps for compact storage.

C5 Corvette Sunshade

This folding accordion C5 Corvette Sunshade design is custom fit specifically for 1997-2004 Corvettes. It fits into the corners of the windshield blocking the sun completely from the dash, which will reduce interior temperature and protect your Corvette’s  interior from the sun’s rays. Your sunvisors hold the shield in place. One side of the shade is made of a silver reflective fabric and the other side is finished in soft felt. Both fabrics are laminated to a form core board, which acts as an insulator to help reduce heat build-up inside your Corvette. This C5 Sunshade includes a C5 Corvette logo on the front.

C6 Corvette Sunshade

Protect your C6 Corvette’s interior from harsh sunlight with this C6 Corvette Cool Shade. The reflective nylon surface effectively blocks rays to reduce heat build-up and prevent interior fading. The 2-piece design includes a screen printed “Corvette” script and C6 Corvette logo. Each panel measures 28″ x 32″. Simply wipe with a damp towel or sponge to keep clean.

C6 Corvette Sunshade

The Ultimate Insulated windshield sunshade for C6 Corvettes is a folding accordion design custom fit specifically for C6 Corvettes. It fits into the corners of the windshield blocking the sun completely from the dash, which helps reduce interior temperature and protect your Corvette’s interior from the sun’s rays. Your sunvisors hold the shield in place. One side of the shade is made of a silver reflective fabric and the other side is finished in soft felt. Both fabrics are laminated to a form core board, which acts as an insulator to help reduce heat build-up inside your Corvette. Sunshade includes a C6 Corvette logo on the front.

By using one of our Corvette sunshades in your Corvette you could prevent fading, cracking, and other problems the sun’s rays will cause. Don’t mistreat your Corvette’s interior any longer; start using a sunshade today. We also carry Corvette Rear Cargo Shades and Corvette hatch vents to help keep your Corvette cool in the summer heat.

C4, C5, C6, Cool Shade, Corvette Cool Shade, Corvette Sunshade, Corvette Windshield, Heat, Interior, Reflective, Sun Protection, Sun's Rays, Sunshade

MSD Ignition designs, develops, tests and manufactures the entire line of MSD products including Ignition Controls, Coils, Timing Accessories and Spark Plug Wires and Accessories. MSD products are the finest ignition components you can install on any Corvette whether it’s a daily driver or a racecar. Zip Corvette Parts is a proud distributor of several MSD Ignition components for C4, C5, & C6 Corvettes. Here is a look at our MSD products for your Corvette:

94-96 Corvette MSD Spark Plug Wires

1992-1996 LT1 & LT4 Corvette: The MSD 8.5mm Super Conductor Wire is “the” performance wire for C4 Corvettes. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 – 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, MSD uses a copper alloy conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) “choke”. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your Corvette. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears.

Continue Reading This Article…

C4, C5, C6, Coils, Conductor, Corvette Distributor, Corvette Ignition, Corvette Spark Plug Wires, Electronic, LS2, LS6, LT1, LT4, MSD

At Zip we strive to satisfy our customers’ every needs when it comes to buying Corvette Parts & Accessories. One of our most important customer service  goals is to be sure we have the most up to date inventory in the Corvette Parts market. By adding parts literally every day to our forever growing inventory, Zip is able to offer one of the largest selections of restoration and performance Corvette Parts in the world.

Corvette Opti-Spark Distributor Assembly

One of the most recent additions to Zip’s inventory includes new C4 Corvette Opti-Spark Distributor Assemblies. These distributor assemblies are for 1992-1996 LT1  & LT4 Corvettes, manufactured by an OEM supplier to the highest quality standards. Each distributor includes a pre-installed cap and rotor, which is factory assembled to eliminate any sealing issues. Also included with each assembly is an extended wiring harness to aid installation and further eliminate associated problems. Don’t be fooled in to thinking you will never need a new C4 Corvette distributor assembly because it is highly likely that every C4 Corvette will need a new opti-spark distributor at some point in time.

C4, Corvette Distributor, LT1, LT4, OEM, Opti-Spark

With the latest addition of the C6 Acrylic Back-Up Light Black-Out Kit, Zip can now “black-out” every exterior light on your 2005-2009 Corvette. All Corvette acrylic black-out kits are made from premium 1/8″ thick pre-molded smoked acrylic. They include clear VHB tape attached to the cover allowing for a simple peel and stick installation in just a matter of minutes.

C6 Corvette Black-Out Kits

Zip also carries Black-Out Kits for C4 and C5 Corvettes as well. These kits are made of the same acrylic as the C6 Corvette Black-Out Kits, which will not affect the view of the Corvette’s brake lights when the brake pedal is depressed. Click here to see all of our Corvette Black-Out Kits or here if you would like to order a free Corvette Parts & Accessories Catalog that comes packed with tons of popular Corvette parts just like this.

C4, C5, C6, Corvette Black-Out Kit, Corvette Light, Exterior

For all C4 road racers looking to upgrade your Corvette’s Brake System, Wilwood has produced some of the best big brake kits on the market. Each kit is equipped with Billet Superlite 6 piston brake calipers in red or black, BP-10 brake pads, machined aluminum hats, 13″ 2-piece SRP or GT brake rotors, and Wilwood stainless steel brake hoses.

C4 Corvette Wilwood Brake Kit

Every part that comes in any Wilwood Brake Package is a performance upgrade from the factory brake system and here is why: The Billet Superlite 6 piston Corvette Brake Calipers feature a fully CNC machined billet body with closed end bridges and a reinforced bridge to body transition. Center bridge body bolts provide additional strength and positive retention of the Corvette’s Brake Pads. These elements combine as an ultra-rigid body that resists separation and deflection under high load. The SL6 brake calipers generate high clamping force and balanced pad loading from a race-proven differential bore six-piston configuration. Staggered piston sizes distribute pressure to compensate for the natural variances in temperature, load, and wear rate that occur over the length of the pad. Therefore, the Corvette Brake Pad life is extended and performance is measurably improved. Stainless steel pistons are used for their low heat transfer properties and resistance to corrosion. Stainless steel bridge wear plates eliminate pad gouging and extend the service life of the caliper. The spring-loaded action of the SRS plates also eliminates brake pad rattle and dampens the vibration harmonics that contribute to brake pad squeal. Fluid tubes are dampened to eliminate vibration stress and recess mounted for protection from track debris. SL6 Corvette Brake Calipers comes with optional black or red anodized finish.

Continue Reading This Article…

C4, Corvette Brake Calipers, Corvette Brake Kits, Corvette Brake Pads, Corvette Brake Rotors, Corvette Brakes, GT, SRP, Wilwood

The Corvette did not become America’s favorite sports car by sporting the same old every day colors and designs. It is in a league of its own from every interior detail to all of the Corvette body curves and lines. One thing that most anyone would agree on when buying or looking at a Corvette is that by pure instinct we are all going to focus on several different aspects; including the Corvette’s Carpet. Immediately following a few quick glances at the front and rear carpet it is only natural to come up with our own personal thoughts towards the overall condition. The point is that the cleanliness of the Corvette’s Carpet can have a huge impact on the overall rating of the car. Do not cheat yourself or your Corvette of the glamor well deserved by ignoring the problem right under your feet. An old, faded, or dirty carpet will surely make the entire car look poor, while a new, clean carpet will make it stand out as exceptional.

Corvette Carpet

As certain trends move in and out of style, Corvette Carpet color and material do as well. What was original in 1953 was not the same in 1963. The material used in 1963, may or may not have been used in 1973. What kind of carpet was used in 1993? As you can see there are many questions that have been raised over the years by Corvette enthusiasts just like you. Zip Corvette has put the time and effort into sorting out the different possibilities so you will be certain your Corvette’s Carpet is 100% correct, fits perfect, and looks great too.

Continue Reading This Article…

80/20, C1, C2, C3, C4, Carpet, Cut Pile, Daytona, Gros Point, Heat Barrier, Interior, TruVette, Tuxedo, Underlayment

As with many low riding vehicles, C4 Corvettes are prone to getting cracks and chips in the lower air dam. Though most of the damage goes unnoticed it can have a direct effect on the performance of your Corvette’s Cooling System.

C4 Corvette Lower Air Dams

The purpose of a C4 Corvette Lower Air Dam is to direct air flow into the radiator cavity which begins the process of cooling your Corvette’s engine. If the first stage of the cooling process is interrupted by a cracked or chipped lower air dam the engine will not perform like it should. The reason for this is simple; lower air dams are designed a specific way causing the air flow to move smoothly into your Corvette’s engine. As many of us know; more cool, smooth air means more horsepower. Without a correct lower air dam less air will be directed into the engine ultimately leading to horsepower decreases.

At Zip Corvette we have everything needed to replace the lower air dams for all C4 Corvettes. Our 1984-1990 reproduction air dam kits are available in both the first and second designs. The first design air dams came without stiffening ribs and were used on 1984-85E and 1987-90 W/O Z51 Corvettes. The second design air dams came with stiffening ribs and were originally used on 1985L-86 and 1987-90 w/Z51 Corvettes. All 1991-1996 Corvettes used the same lower air dams.

When replacing your Corvette’s Lower Air Dams take notice of the lower outer retainers, the lower center retainer, and the air dam mounting hardware. If any of these components look a little beat up we have reproduction retainers and hardware kits to mount original style air dams on 1984-1996 Corvettes.

C4, Corvette Cooling, Corvette Engine, Corvette Horsepower, Corvette Lower Air Dam, Corvette Radiator, Corvette Spoiler, Reproduction, Z51

Upgrade your C4, C5, or C6 Corvette cooling system with a Direct Fit Aluminum Radiator:

With a 100% stock 1984-2009 Corvette the factory radiator will work efficient enough to keep the car running cool. As soon as you begin modifying your Corvette you are going to push the factory radiator beyond its limits. The reason for radiator failures in modified Corvettes is a result of the single row core design. The end tanks were made of plastic and held in place with small crimp tabs and a neoprene rubber gasket was used to seal the tanks to the core. Frequent end tank failures and gasket leaks are just a few of the common problems associated with factory radiators installed in modified Corvettes. For complete assurance that your next radiator will not fail consider a Direct Fit Aluminum Radiator. They feature press formed end tanks that are tig welded directly to the double row core, providing a permanent seal.

Stock Single Row vs. Direct Fit Double Row Radiator

At Zip Corvette we offer the best Direct Fit Radiators on the market for C4, C5, & C6 Corvettes. Our Corvette Direct Fit Aluminum Radiators are just what the name implies; a direct fit. Many companies offer replacement Corvette radiators that are considered “direct fit” but in fact most require some alterations. True Direct Fit radiators are designed to install into the stock mounting and use the factory connections without any modifications or adapters. Each Direct Fit Radiator starts with a USA made core that is furnace brazed in a force nitrogen furnace. They feature two rows of 1″ cooling tubes (which will help double the cooling capacity of stock radiators), a serpentine fin, and are epoxy free. Each Direct Fit tank is manually tig welded by expert craftsmen, providing the ultimate in strength and appearance.

Continue Reading This Article…

automatic, C4, C5, C6, Corvette Cooling, Corvette Direct Fit Radiator, Corvette Dual Fan Upgrade Kit, Corvette Engine Oil Cooler, Corvette Radiator, Corvette Transmission Cooler, LS1, LS6, Z06, Z51

For 30 years, Borla has been one of the most sought out manufacturers of Corvette performance exhaust systems. Their specialized designs and excellent quality has left its mark across the map in both the racing and the street world. Incorporating their patented design and distinct sound into the C4, C5, C6, & Z06 Corvette has been a main focus of the Borla team for quite some time.

Borla Performance Exhaust

Continue Reading This Article…

Air Flow, Borla, C4, C5, C6, Corvette Borla Exhaust System, Corvette Borla Stinger, Corvette Borla Touring, Corvette Exhaust, Corvette Exhaust Tips, Corvette Muffler, Corvette Stinger Exhaust System, Corvette Touring Exhaust System, Corvette XR-1 Exhaust System, Horsepower, Performance Exhaust System, Stinger II, Velocity, Z06