Corvette Parts Blog

Corvette CV Joint Boots

Though they may not seem like much your C5 or C6 Corvette’s Inner & Outer CV Joint Boots play a key role in keeping your Corvette on the road. They are prone to cracking or splitting, which can have multiple negative effects on the drive-ability of your Corvette. Besides allowing contamination into the CV joint itself and causing premature wear of the bearings, cracked CV joint boots allow grease to be slung out of the boot, which can saturate your Corvette’s Brakes.  This would not only cause an increase in braking distances but can also ruin your Corvette’s brake pads and rear rotors. If you have replaced your Corvette’s rear brake components or upgraded to performance brake pads & rotors, you know that brake rotor and pad replacements can get very expensive.

Until now the only sure way to avoid damage from bad CV joint boots was to replace the expensive CV axle shaft, which comes with new inner and outer CV joint boots. With the recent addition of our C5 & C6 Corvette Inner & Outer CV Joint Boot Kits you can now replace your Corvette’s CV joint boots without spending hundreds of dollars for the entire axle shaft. We have inner and outer CV joint boots for all C5, C6, Z06, Z51, Grand Sport, & ZR1 Corvettes. Each kit includes one inner or outer boot, clamps, & the correct amount of grease to replace a single boot.

C5, C6, Corvette CV Axle Shaft, Corvette CV Axle Shaft Joint Boot, Corvette Inner CV Joint Boot, Corvette Outer CV Joint Boot, Grand Sport, Z06, Z51, ZR1

Painted Corvette Engine Components add a great deal of style under the hood of C5 Corvettes. Zip carries painted Corvette fuel rail covers, Corvette intake manifold covers, Corvette radiator surge tank & washer tank covers, Corvette radiator shroud covers, Corvette fuse box covers,  & Corvette brake booster covers for 1997-2004 C5 Corvettes. View all of our Painted C5 Corvette Engine Components here.

C5 Corvette Fuel Rail Covers

These custom designed fuel rail covers replace your Corvette’s factory fuel rail covers and feature our exclusive  seven step paint finishing process, for a perfectly brilliant “smooth” surface. The beautiful final coating has been chosen to provide years of service with resistance to heat, oil and gasoline vapors. Each set of painted Corvette Fuel Rail Covers are available in your choice of factory Corvette colors and colored trim.

Our Painted C5 Corvette Intake Manifold Covers are hand made in the USA. Each cover is manufactured from premium fiberglass, gel coated and then meticulously painted in our seven step process creating a smooth, mirror like finish. Installation of the intake manifold cover is fast and simple as it attaches with provided 3M tape. This cover is available in all C5 Corvette exterior colors.

C5 Corvette Surge Tank Cover

Our C5 Corvette Radiator Surge Tank Covers &  C5 Corvette Washer Tank Covers are made of quality ABS plastic. Installation of each cover takes less than 5 minutes. For added security you can use the provided 3M tape, however both painted Corvette engine covers are designed to “snap” over top of your stock radiator surge tank or windshield washer tank. Each cover is available in all C5 Corvette exterior colors.

This C5 Corvette Painted Radiator Shroud is custom painted to make your C5 Corvette engine bay look great. The painted radiator shroud is a great compliment to painted fuel rail covers or any other painted engine component. The shroud cover is available in all C5 Corvette exterior colors and is pictured here with the optional “CAUTION FAN” lettering in separate color. This option is available but must be special ordered and cannot be selected through our website.

C5 Corvette Brake Booster Cover

Also available to dress up your Corvette’s engine bay is our C5 Corvette Painted Fuse Box Cover & C5 Corvette Painted Brake Reservoir & Booster Cover. Our fuse box cover installs in less than five minutes and adds life under the hood of your Corvette by replacing the stock fuse box cover with a great looking part. The brake reservoir & booster cover adds a smooth mirror like finish to what is typically a messy area under the hood. Both covers are available in all C5 Corvette exterior colors and install in just a matter of minutes.

Zip Installs Corvette Parts! If turn-key sounds better than “do-it-yourself” then drop your Corvette off at Zip and we’ll install any of these C5 Corvette Painted Corvette Engine Components and you can be on your way with clean hands and a great looking engine.

C5, C5 Corvette, Corvette Brake Booster Cover, Corvette Fuel Rail Covers, Corvette Fuse Box Cover, Corvette intake Manifold Cover, Corvette Radiator Shroud, Corvette Radiator Surge Tank Cover, Corvette Washer Tank Cover, Painted Corvette Engine Components

Protect your Corvette’s Interior from damaging UV rays with a new Corvette Sunshade from Zip. While the hot summer months bring plenty of warm weather to enjoy they unfortunately can do more harm than good to your Corvette’s interior. With interior temperatures reaching a scorching 150 degrees inside many Corvettes, you can only imagine what day after day exposure to this amount of heat and sunlight is doing to your dash, leather, vinyl and other interior components.

The easiest solution for protecting your Corvette’s interior from the extreme heat and sunlight is to install a Corvette Sunshade. You can purchase very cheap sunshades from a local auto parts store but the fact is that they are not custom made to fit a Corvette and they simply do not look as nice as our Corvette Sunshades. We offer sunshades for C4, C5, and C6 Corvettes all of which come with the Corvette logo and are custom made to fit your Corvette.

C4 Corvette Sunshade

This C4 Corvette Cool Shade is specifically designed for 1984-1996 Corvettes. It’s reflective nylon surface effectively blocks rays to reduce heat build-up and prevent fading. The 1-piece lightweight coil frames twist closed to a compact 9″ for easy storage. To clean this sunshade simply wipe down with a damp towel or sponge. Sunshade includes “Corvette” script on one side and a C4 Corvette logo on the other.

C5 Corvette Sunshade

This 2-pc C5 Corvette Cool Shade is designed to fit 1997-2004 Corvettes. Like the C4 sunshade the Reflective nylon surface effectively blocks rays to reduce heat build-up and prevent fading. Each panel measures 28″ x 32″ and includes a screen printed “Corvette” script and a C5 Corvette logo. Simply wipe the sunshade with a damp towel or sponge to keep clean.

C5 Corvette Sunshade

This 1-pc C5 Corvette Sunshade will fit your Corvette’s windshield perfectly. The sunshade is triple laminated constructed and has a reflective outer layer, which blocks direct sun and protects the interior surfaces from heat build-up and fading. The sunshade features a C5 logo and sewn-in Velcro straps for compact storage.

C5 Corvette Sunshade

This folding accordion C5 Corvette Sunshade design is custom fit specifically for 1997-2004 Corvettes. It fits into the corners of the windshield blocking the sun completely from the dash, which will reduce interior temperature and protect your Corvette’s  interior from the sun’s rays. Your sunvisors hold the shield in place. One side of the shade is made of a silver reflective fabric and the other side is finished in soft felt. Both fabrics are laminated to a form core board, which acts as an insulator to help reduce heat build-up inside your Corvette. This C5 Sunshade includes a C5 Corvette logo on the front.

C6 Corvette Sunshade

Protect your C6 Corvette’s interior from harsh sunlight with this C6 Corvette Cool Shade. The reflective nylon surface effectively blocks rays to reduce heat build-up and prevent interior fading. The 2-piece design includes a screen printed “Corvette” script and C6 Corvette logo. Each panel measures 28″ x 32″. Simply wipe with a damp towel or sponge to keep clean.

C6 Corvette Sunshade

The Ultimate Insulated windshield sunshade for C6 Corvettes is a folding accordion design custom fit specifically for C6 Corvettes. It fits into the corners of the windshield blocking the sun completely from the dash, which helps reduce interior temperature and protect your Corvette’s interior from the sun’s rays. Your sunvisors hold the shield in place. One side of the shade is made of a silver reflective fabric and the other side is finished in soft felt. Both fabrics are laminated to a form core board, which acts as an insulator to help reduce heat build-up inside your Corvette. Sunshade includes a C6 Corvette logo on the front.

By using one of our Corvette sunshades in your Corvette you could prevent fading, cracking, and other problems the sun’s rays will cause. Don’t mistreat your Corvette’s interior any longer; start using a sunshade today. We also carry Corvette Rear Cargo Shades and Corvette hatch vents to help keep your Corvette cool in the summer heat.

C4, C5, C6, Cool Shade, Corvette Cool Shade, Corvette Sunshade, Corvette Windshield, Heat, Interior, Reflective, Sun Protection, Sun's Rays, Sunshade

New Magnaflow Exhaust Systems are now available from Zip Corvette! Zip currently has the Magnaflow Series Exhaust System, Magnaflow XL Series Exhaust System, & the Magnaflow Tru-X Crossover Pipe for all C5 Corvettes. C6 owners don’t worry as Zip will be adding C6 Magnaflow Exhaust Systems very soon.

Magnaflow Corvette Exhaust

Each Magnaflow Exhaust System offers added horsepower and torque, a smooth; deep tone, and stunning looks. Both Magnaflow Corvette Exhaust Systems are fully welded and made of 100% stainless steel. The 2.5″ mandrel bent systems come with quad 4″ exhaust tips, all necessary hardware for installation, and a manufacturers lifetime warranty. If you want even more performance from your Corvette, Zip also has the Magnaflow Crossover Pipe to match either cat-back exhaust system. This pipe is made from the same 2.5″ mandrel bent stainless tubing and is specifically designed to create a more productive exhaust flow then the stock tubing. Combine this crossover pipe with any Magnaflow Exhaust System and your C5 Corvette will be sure to impress.

Are you interested in learning how to install a Magnaflow Exhaust System on your C5 Corvette? View the installation instructions for the Magnaflow Series here or the Magnaflow XL Series here. If you are not convinced that this is a job for you then let one of Zip’s talented professionals install your new exhaust system for you. All work performed in house will be backed by our customer satisfaction guarantee.

C5, Cat-Back, Corvette Crossover Pipe, Corvette Exhaust, Magnaflow Exhaust, Mandrel Bent

A common failure on many C5 Corvettes with even slight modifications is the power steering pulley. The stock, plastic pulleys were not designed to withstand the added horsepower and rpms, which many Corvettes are exposed to after several modifications. This on top of the fact that some of the OEM plastic pulleys are now 12 years old could leave you with a weak point under your Corvette’s hood.

Corvette Power Steering Pulley

Zip Corvette’s very own Billet Power Steering Pulley replaces the stock pulley with a much more dependable, better looking part. Machined from 6061-T6 Billet Aluminum, this 10 spoke highly polished pulley will add brilliance to the front of your Corvette’s Engine. With the addition of this pulley you will be able to add the performance modifications of your choice, without the result of a broken power steering pulley. Exclusive to Zip Corvette, this pulley is manufactured in the United States and will install on C5 & C6 Corvettes.

Another excellent Corvette Part at a low price, exclusively from Zip Corvette.

Aluminum, Billet, C5, C6, Corvette Engine, Corvette Power Steering Pulley, Horsepower

MSD Ignition designs, develops, tests and manufactures the entire line of MSD products including Ignition Controls, Coils, Timing Accessories and Spark Plug Wires and Accessories. MSD products are the finest ignition components you can install on any Corvette whether it’s a daily driver or a racecar. Zip Corvette Parts is a proud distributor of several MSD Ignition components for C4, C5, & C6 Corvettes. Here is a look at our MSD products for your Corvette:

94-96 Corvette MSD Spark Plug Wires

1992-1996 LT1 & LT4 Corvette: The MSD 8.5mm Super Conductor Wire is “the” performance wire for C4 Corvettes. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 – 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, MSD uses a copper alloy conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) “choke”. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your Corvette. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears.

Continue Reading This Article…

C4, C5, C6, Coils, Conductor, Corvette Distributor, Corvette Ignition, Corvette Spark Plug Wires, Electronic, LS2, LS6, LT1, LT4, MSD

At Zip we strive to satisfy our customers’ every needs when it comes to buying Corvette Parts & Accessories. One of our most important customer service goals is to be sure we have the most up to date inventory in the Corvette Parts market. By adding parts literally every day to our forever growing inventory, Zip is able to offer one of the largest selections of restoration and performance Corvette Parts in the world.

C5 Corvette Ball Joint

One of the most recent additions to Zip’s inventory includes C5 Corvette upper & lower ball joints. For years they have not been available, but now you can buy them through Zip. Before, if your Corvettes suspension became loose, causing inconsistent handling and/or aggressive tire wear you could only purchase a whole new control arm with the ball joints already installed. The problem here is that a complete control arm replacement with labor could run well above $1000. Today, new Corvette ball joints are $59-$72. These ball joints, exclusive to Zip Corvette, are direct replacements for the factory Corvette ball joints and could be the solution to a faulty suspension.

C5, Corvette Ball Joints, Corvette Handling, Corvette Suspension

No matter how careful you are a cracked, scratched, or broken air dam is hard to avoid. Not only does it look bad but it can rob your Corvette of valuable horsepower as well. As written in our C4 Corvette Lower Air Dam Blog Post, air dams also known as spoilers are designed to direct air into your Corvette’s radiator cavity, which allows your Corvette’s engine to cool and perform to its maximum capacity.

C5 Corvette Lower Air Dam Set

Take away that smooth airflow and a significant decrease in power will be noticed. In the past C5 air dams have been available but at a costly expense. Zip now has C5 3-Piece lower Air Dam Sets available for a fraction of what they have cost in the past. If your lower air dam is cracked or broken don’t make the mistake of thinking it is not going to have an effect on your Corvette because it will.

Airflow, C5, Corvette Air Dam, Corvette Spoiler

With the latest addition of the C6 Acrylic Back-Up Light Black-Out Kit, Zip can now “black-out” every exterior light on your 2005-2009 Corvette. All Corvette acrylic black-out kits are made from premium 1/8″ thick pre-molded smoked acrylic. They include clear VHB tape attached to the cover allowing for a simple peel and stick installation in just a matter of minutes.

C6 Corvette Black-Out Kits

Zip also carries Black-Out Kits for C4 and C5 Corvettes as well. These kits are made of the same acrylic as the C6 Corvette Black-Out Kits, which will not affect the view of the Corvette’s brake lights when the brake pedal is depressed. Click here to see all of our Corvette Black-Out Kits or here if you would like to order a free Corvette Parts & Accessories Catalog that comes packed with tons of popular Corvette parts just like this.

C4, C5, C6, Corvette Black-Out Kit, Corvette Light, Exterior

Laser Mesh exterior accessories from American Car Craft are now available for all C5 Corvettes. The stainless steel inserts are perfectly laser cut into a precise diamond mesh pattern. Once cut they are then hand tooled and specifically engineered to achieve the sparkle and glitter that every Corvette should possess. Installing Laser mesh exterior accessories is one of the easiest ways to spice up your Corvette’s exterior. Unlike other accessories of this sort which are constructed of a wire mesh material, ACC’s Corvette laser mesh is a premium 304 stainless steel that will never tarnish, pit or loose its luster. With no modifications necessary to install there is no doubt that you will drive away leaving everyone admiring the “little things” about your Corvette.

C5 Laser Mesh Tail Light Grills

C5 Laser Mesh Brake Light Grill

Continue Reading This Article…

American Car Craft, C5, Corvette 5th Brake Light, Corvette Brake Duct, Corvette Brake Light, Corvette Exterior Accessories, Corvette Fog Light, Corvette Stainless Steel, Corvette Tail Light, Laser Mesh