Corvette Fender Mats & Covers

You work hard to keep your Corvette looking it’s best – on the inside and out. Imagine the heartbreak if the next (or first) chip or scratch comes from you – in your own garage.

Leaving your fenders unprotected while working under the hood is just asking for trouble. Tools slip out of hands, loose parts fall to the cement floor and paint jobs are ruined.  But an ounce of prevention goes a long way.  Before you pop the hood to get your hands dirty, protect your paint job with a Corvette Fender Mat or Cover. Quality “no-slip” backing ensures the mat stays in place while you work and when the job is done, the mat easily wipes clean. Available in a variety of styles for all generations, you can’t afford to be without these mats!

C6 Corvette Nose Masks

Now you can color match your C6 ZR1 & Grand Sport Corvette’s nose mask and factory body color. Our C6 Corvette Speed Lingerie Nose Masks are hand cut and stitched to order for a perfect fit. Each Speed Lingerie nose mask is constructed into a single piece, which guarantees that they will remain flap-free up to 150 mph! Because these Speed Lingerie nose masks are custom designed for your C6 ZR1 or Grand Sport Corvette and they are manufactured from the highest grade materials Speed Lingerie offers a limited lifetime warranty against manufacturing defects.

A perfect compliment to a new C6 Corvette nose mask by Speed Lingerie is a pair of matching Corvette Mirror Covers. Also manufactured by Speed Lingerie, these mirror covers will match perfectly, fit great and install in seconds. In addition to mirror covers we also carry a number of interior accessories by Speed Lingerie. For more information read: “Corvette Accessories by Speed Lingerie for C5 & C6” posted here at Corvette Parts Blog.

Adam's In & Out Spray

Adam’s popular In & Out Spray, which was discontinued for nearly two years is finally back. The popular cleaner/detailer comes in an aerosol can, is dry to the touch within moments and is capable of restoring your Corvette’s faded and dull plastic, rubber, and vinyl trim to a like new condition with just a single spray. This amazing product can be used on all the hard to reach areas, like A/C vents, wiper cowls, grills, and even under the hood to dress your Corvette’s engine compartment.

Adam’s In & Out Spray simply wipes away from surfaces such as glass and paint so there is no need to worry about over-spray getting onto those areas. One swipe with a plush microfiber towel and the over-spray residue is gone! There has never been an easier way to clean and freshen up your Corvette’s trim. In & Out Spray is guaranteed to impress you every time you use it.

C5 Corvette Skid Plate/Radiator Support Cradle

Damage to 1997-2004 C5 Corvette Front Skid Plate & Radiator Support Cradles is very common. They are very susceptible to dents, cracks, and scrapes from running into parking lot stops and curbs. If the damage is serious enough your Corvette’s radiator could be dislodged, creating havoc with cooling issues. If you have had a front end collision then you certainly must replace this item when rebuilding your Corvette’s front end.

We see many C5 Corvettes in our shop that have cracked cradles and many times the owner doesn’t even know it. These cradles crack easily when hitting speed bumps or other road obstacles. While a cracked cradle may not be something to be overly worried about, many owners choose to replace the cradle anyway. Installation is not simple, many of your Corvette’s front end pieces will need to be removed and it will take some time to replace the cradle. When you go to GM to try to buy this piece, do not be surprised if they charge you twice the price of ours.

Our new reproduction C5 Corvette Front Skid Plate & Radiator Support Cradle bolts to the front frame extensions allowing you to return your Corvette to its factory condition. Each skid plate & cradle includes the correct small and large hex head rivet nuts for installing to your Corvette’s frame assembly. These hex head nuts are typically only available through GM where you will pay approximately $7 a nut. Without these nuts you would have to install a generic round head nut that requires a special tool to install. The correct nuts are included with a new support cradle or separately if needed.

One way that you can help prevent your Corvette skid plate/radiator support cradle from being damaged is to install some of our C5 Corvette Skid Plate Stiffeners and/or our C5 Corvette Front Bumper Skid Rollers. Our skid plate stiffeners install easily in 15 minutes and will save your Corvette from damage often cause by parking stops and curbs. Our front bumper skid rollers take about an hour to install. They feature an active skid plate design with proprietary integrated urethane wheels that will eliminate costly front-end damage caused by lowering, steep driveways or other obstacles. Each set includes a pair of bumper savers and all necessary hardware. Welding is not required to complete installation but is recommended.

Corvette Front Bumper Mask

The original “StetchBra” cloth Corvette Front Bumper Mask is tailored for an exact fit and is available in a choice of colors for your C4, C5 or C6 Corvette. The mask is convenient to use, easy to clean (hand or machine washable) and comes with a pocket-size storage bag which will fit in your Corvette’s storage compartments. Unlike other cheap Corvette nose masks our masks are Made in the USA and include a Lifetime Warranty. They are made of a polyester knit to get that great fit, without any gaps or warping even at high-speeds. The revolutionary material allows air to flow through, providing a clean look to your Corvette’s front end while protecting your Corvette’s finish from bugs and road grime. Its super soft material will not harm your Corvette’s paint.

The base model C6 Corvette Front Bumper Nose Mask, like the Grand Sport or Z06/ZR1 masks, installs easily in less than 30 minutes. Each “StretchBra” mask attaches with retaining clips across the hood opening area and snaps in the wheel well area. Once the snaps are installed the mask can be fitted to your Corvette in just minutes. A built-in stretch cord in the bottom of the mask pulls tight providing the clean, snug fit that can not be replicated with any other material.

For improved cooling efficiency, Z06 & ZR1 Corvette cloth bumper masks can be installed on Grand Sport Corvettes. The Z06 mask features a “screened opening” to improve airflow and reduce the potential for overheating problems common with Z06 Corvettes. While not required for Grand Sport Corvettes, the Z06/ZR1 mask will install without any modifications.

The “StretchBra” front bumper cloth masks are also available for C4 and C5 Corvettes. The masks fit all C4 and C5 Corvettes including the ZR-1, Grand Sport and C5 Z06. Installation and care of these bumper masks are just as simple as they are on the C6.

To show how simple the installation of these nose masks are we have included step-by-step instructions that show how to install the C6 Z06/ZR1 Corvette (Grand Sport if desired) Front Bumper “Stretch Bra” Cloth Nose Mask on a 2007 Z06…

Step 1

Remove the five (5) screws that attach the ground affects/fender liner to the front fender of your Corvette. Repeat for both the left and right side.

Step 2

Replace the ten (10) torx head screws with the ten (10) snap screws that are supplied with the front bumper mask. Repeat for both the left and right side.

Step 3a

Attach the snaps on one end of the nose mask to the inside of your Corvette’s fender (Note: The top of the mask has plastic retainer clips). Pull the bottom of the mask under the front bumper and stretch the mask across the bumper.

Step 3b

Attach the snaps on the opposite end of the mask to the inside of the opposite fender. Be sure that the bottom of the mask remains under the front bumper.

Step 4a

Anchor the top of the mask inside the engine compartment with the plastic clips. The two inner clips will attach just under the hood seal in the vertical position.

Step 4b

The two outer clips will attach on each end of the bumper mounting bracket in the horizontal position. Be sure to attach the outer clips to the edge of the mounting bracket as shown to keep the mask stretched tight.

Step 4c

Here you can see one of the inner clips has been attached to the bumper mount bracket. Make sure that each clip rivet is pulled away from the hood before moving on.

Step 4d

Here you can see both inner clips attached in the vertical position to the bumper mount bracket. Each clip rivet is inside the engine compartment allowing for hood clearance when closing.

Step 5

Place the Velcro strip supplied with the mask under your Corvette to mate up with the Velcro strip on the bottom of the mask. Attach the six clips in the center of the mask to the grill to complete installation.

After the front bumper mask has been installed check to be sure that all snaps are fastened securely and all clips are attached properly. It is not recommended to leave the front bumper mask on for extended periods of time. The mask may be cleaned by hand or machine washed in a laundry bag with a mild detergent (no bleach).

Our Corvette Fender Grippers are available in many different colors, sizes and come with any desired screen printed Corvette logo. If you truly want to protect your Corvette’s paint while working in and around the engine bay consider one of our many fender grippers shown below.

Adam's Polishes & Detailing Equipment

Zip believes the type of car care products used is ultimately the biggest factor in achieving that outstanding shine. Though many car wash, wax, & detail products have a similar look or smell they do not all perform to the same level. Adam’s Polishes, when used correctly have proven to clean and detail a Corvette to even the most particular enthusiasts standards; that’s why Zip uses Adam’s products on both company owned and customer’s Corvettes.

Each Adam’s polish has its own unique qualities all of which are designed to be used in a particular manner. Click Here to watch instructional videos that teach how to combine the different products to achieve that perfect shine.

If you are looking for the perfect Corvette Gift consider a 16oz. bottle of Adam’s Car Wash or Detail Spray. These products and many more are sure to garner a smile from any Corvette enthusiast no matter what the occasion may be.

Here are some of our most popular Adam’s Car Care Products used on even the most delicate Corvettes.

Detail Spray

Adam’s Detail Spray is the cornerstone of their product line and is the most versatile component in any detail kit. This “Best in Show” winner is a favorite at Corvette shows. You can use it as a waterless car wash, a clay bar lubricant, or to enhance the depth and clarity of paint, chrome, plastic, aluminum, and glass. The specially formulated lubricants gently remove dirt, smudges, and grime, leaving surfaces with a smooth, ultra-high gloss finish. Use Adam’s Detail Spray in the sun or shade, and in hot or cool temperatures.

Car Wash

Adam’s specially formulated Car Wash Soap is Ph-balanced and will not strip the protective coating off your finish. The highly concentrated soap is extremely gentle on all Corvette surfaces and it is biodegradable. Like the detail spray, you can use it in the sun and it will not streak or spot your Corvette’s surfaces.

Buttery Wax

Leading the charge in technological advances, Adam’s Buttery Wax is formulated with a special blend of polymers, resins, and natural Carnauba. Buttery Wax contains no cleaners or abrasives, and will not stain plastic or rubber. Our 16-oz bottle will cover many vehicles, especially when used sparingly as recommended. Adam’s Buttery Wax is suitable for application in the sun or shade, and in hot or cool temperatures. Before applying buttery wax treat your Corvette with Adam’s Clay Bar and Revive Polish for best results.

V.R.T. Protection

Enhance and protect the appearance of plastic, rubber, tires, moldings, dashboards, and door panels with Adam’s V.R.T. Protectant. Adam’s V.R.T. contains no harmful silicone or alcohol. The thick moisturizing cream applies easily with a sponge and will not leave a greasy film, attract dirt, or harm paint and glass. The added U.V. protection keeps Corvette interiors and exteriors looking and feeling like new.

All-Purpose

Adam’s Professional Strength All-Purpose Cleaner is a heavy duty, lemon scented spray that’s effective at removing brake dust, cleaning engines, cutting grease and cleaning applicator pads. All-Purpose Spray can also be used on more delicate surfaces such as Corvette Aluminum Wheels, simply dilute the cleaner with water by 50%.

Adam's Clay Bar

Adam’s Clay Bar is the finest and safest detailing clay for your Corvette’s finish. Combine it with the use of Adam’s Detail Spray and all surface contamination such as bugs, tar, tree sap, and more will be safely removed without skid or swirl marks left behind. The large 4-oz clay bar is suitable for 8 – 10 cleanings simply fold a re-stretch the clay once the surface looks contaminated.

Zip Corvette Detail Kit

Zip Corvette Detail Kit provides all necessities for keeping your Corvette looking fresh including some of the most popular Adam’s Polishes & Applicators. Corvette Detail Kit comes complete with: Adams Premium Detail Spray, All Purpose Cleaner, V.R.T. Protectant (Vinyl, Rubber & Tire), Brilliant Spray Glaze, Glass Cleaner, (3) Adams Detail Sponges, (2) Microfiber Polishing Towels, (1) Jumbo Microfiber Drying Towel, (1) Applicator Pad, & (1) Detail Bag. Zip’s very own detail bag features a 14″ long x 7″ wide x 11.5″ high design. It is fully lined to prevent leaking from possible spills, includes 6 elastic straps to store containers in an upright position, has 4 exterior pouches for additional storage, a zipper top lid with handle, and an embroidered Zip logo.

Adam's Complete Corvette Detail Kit

This collection is comprised with all of Adam’s key products to perfect and maintain your Corvette. Adam’s Complete Detail Kit is ideal for those who are willing to go the extra mile to make their Corvette shine and last better then all others. Here are some of the top polishes and equipment included with this Corvette Detail Kit: Adam’s Car Wash, Detail Spray, V.R.T. Protectant, All Purpose Cleaner, Buttery Wax, 4.25 Gallon Bucket, Microfiber Polishing Towels, Interior & Exterior Applicator Pads, Fire hose Spray Nozzle, Instructional DVD, and much more.

Click here to view the embedded video.

Corvette Winter Storage Article

Storing your Corvette away for the winter is more than parking it in the garage and forgetting about it until Spring. The car has to be prepared correctly to prevent things such as moisture and rodents from damaging your pride and joy. Your Corvette should always be stored in an insulated building with a concrete floor, but sometimes, you just have to take what you can get. Try to stay away from uninsulated and unheated garages because in colder climates the severe temperature changes promote moisture and moisture causes problems. You can help to prevent this by placing pie pans containing charcoal briquettes around on the floor. Also, commercial absorbents used for closets and damp rooms will help but remember to change these approximately every 30 days. Always use a quality Corvette Car Cover. Never use a plastic, rubber, canvas or waterproof cover. They all trap moisture…Follow along as Zip Corvette shows you have to get you Corvette ready for the winter.
Click here to read our Corvette Winter Storage article.