How do I remove the starter from my 1972 Corvette?

68-82 Corvette Starter Mount

The procedure for removing and installing the starter on a 1972 Corvette applies to all 1968-1982 Corvettes. It is not a difficult task to complete and only requires basic mechanical tools. To begin the removal first disconnect the battery cables (negative first) and raise the Corvette to an ideal working height. Next disconnect each wire at the solenoid terminals but be sure to reinstall the nuts after removing each wire as the thread sizes are different. If your Corvette has a big block, which included the starter solenoid shield you can now remove the front bracket upper bolt and remove the shield from the starter. For Corvettes equipped with the 350 engine you can now loosen the front bracket and remove the two mount bolts. You are now ready to remove the starter from the Corvette. After rotating the bracket away from your work space, lower the starter from the Corvette front first while holding it against the bellhousing.

Once you are ready to reinstall your Corvette’s Starter you can simply reverse the order of these instructions. Be sure to torque the mount bolts to 25-35 ft./lbs. first, followed by the starter brace bolt. Once correct operation of your Corvette’s starter is confirmed the removal and installation is complete.