Corvette Brake Pad Shim Kit

To install the shims without removing the pads from the brake caliper just rock the pad up and down while they are still inside the caliper. Slide the plastic shim down the trailing edge of each pad as far as possible and trim any excess from the top. The kit is designed to have one shim installed on each inner and outer brake pad on the Corvette. If vibration or noise persists you can move the shim from one edge to the other, or, place a shim on both edges of each brake pad. One way or the other, this simple brake pad shim kit from Zip could be a simple solution to a noisy set of brakes.