Are you looking for race quality products that do not beat you up on the street? Pfadt Racing Sway Bars are the easiest way to perfect the handling of your C5 or C6 Corvette without sacrificing ride quality. These Pfadt Racing Sway Bars are adjustable in both the front and rear to tune your handling. They are designed to bolt in for easy installation, and set up to reduce your Corvette’s tendency to push in the turns. Pfadt C5 and C6 Sway Bars are significantly lighter than both stock and after market bars weighing just 9.5 pounds. 4 pounds lighter than stock!

Pfadt’s “Pfatty” Adjustable Sway Bar for C5 and C6 Corvettes is the alternative to running the super stiff T1 sway bars. The front bar measures 38mm in diameter, same as the GM T1 sway bar. The rear sway bar measures 28mm; both sway bars feature adjustable ends so the suspension can be softened if desired. Pfadt “Pfatty” Adjustable Sway Bar Package is recommended for serious track use. You will be thrilled with the reduced body roll and stability in the turns!

High horsepower or hard-core track days can be hard on engine oil temperatures. This 1997-2004 Corvette Oil Cooler Kit can reduce engine oil temperatures up to as much as 60 degrees. It also includes lightweight ducting to direct the maximum amount of air to the stand-alone cooler, braided stainless steel lines with pre-assembled AN fittings, billet aluminum oil block, and attaching hardware.

Hold the powertrain in place with Pfadt’s uniquely designed transmission brace. This mount reduces the massive powertrain shake (sometimes mistaken as wheel hop) that is common in the C5 Corvette. Pfadt’s Transmission Brace is an excellent solution for high horsepower or performance driven Corvettes. It bolts to the differential to limit powertrain movement and reduces the load on your half-shafts and other driveline components. The Transmission Brace is constructed with 6061 T6 aluminum and anodized for maximum durability. You can couple this transmission mount with Pfadt’s C5 Engine Mounts for an unbeatable package.

Pfadt C5 & C6 Corvette Coil Overs are engineered for exceptional street driving and track performance. Unlike some coil overs, Pfadt’s allow you to adjust ride height independent of spring pre-load so you do not have to compromise ride quality for ride height. Pfadt’s coil overs also feature a compression and rebound dampening adjustment that can be tuned while the suspension is on the Corvette. The shocks are a monotube design for simplicity and durability and are fully rebuildable. Pfadt 1997-2009 Corvette Adjustable Coil Over Shock Kit is a pure bolt on upgrade and fits C5 & C6, standard or Z06 equipped Corvettes.

If you are looking to upgrade your Corvette’s shocks but not looking to make the change to coil overs, these Pfadt Inverted Adjustable Shocks are perfect for your Corvette. Pfadt has designed an adjustable shock that will allow you to “turn it up” for track use or “dial it down” for street use, without tools and without removing the shocks from your Corvette.

Pfadt’s C5 & C6 Corvette Camber Adjustment  Kit allows you to achieve the maximum negative camber and eliminates the eccentrics so that the settings do not slip. This kit replaces the bolts on the front upper a-arms with stainless steel studs and Pfadt provides stainless steel shims to set your desired camber and caster. The lower eccentrics are eliminated and the bolts are locked into their maximum position using a set of off-set plates. For the rear Pfadt provides a set of shims for the eccentric to dial in your alignment and make it stick.

Pfadt’s C6 Z06 Corvette Camber Adjustment  Kit allows you to achieve the maximum negative camber and eliminates the eccentrics so that the settings do not slip. This kit replaces the bolts on the front upper a-arms with stainless steel studs and Pfadt provides stainless steel shims to set your desired camber and caster. The lower eccentrics are eliminated and the bolts are locked into their maximum position using a set of off-set plates. For the rear Pfadt provides a set of shims for the eccentric to dial in your alignment and make it stick.

The complete Pfadt Polyurethane Control Arm Bushing Kit with new aluminum shafts & sleeves is designed to quickly replace all of your Corvette’s factory rubber bushings with new polyurethane bushings. Polyurethane bushings maximize your suspension’s performance by delivering quicker steering response and predictable handling in all driving modes. Complete Pfadt Polyurethane Bushing Set includes rear spring cushions, front control arm bushings, and rear control arm bushings PLUS new shafts and retainers for a quicker installation. This Pfadt Control Arm Bushing and Shaft Kit fits all C6 Z06 Corvettes.